2508 Combined Cycle Operation

Code:
EL32976
Objective:

Terminal Objective: The trainee shall describe the heat recovery system associated with a combined cycle operation.Enabling Objective: The trainee shall describe the typical gas turbine exhaust temperatures.Enabling Objective: The trainee shall describe the typical gas mass flow rate expected.Enabling Objective: The trainee shall describe the common arrangements for heat recovery systems.Enabling Objective: The trainee shall explain the relationship between (a) exhaust gas temperature and volume and (b) steam production.Enabling Objective: The trainee shall explain how the following components are integrated to form a combined cycle plant for each of the following:o Gas turbineo HRSGo Steam turbineTerminal Objective: The trainee shall describe the configuration of a complete combined cycle unit.Enabling Objective: The trainee shall explain the function of each major component including:o Gas turbineo HRSGo Steam turbineEnabling Objective: The trainee shall describe the relative output capacities of the combined cycle unit components.Enabling Objective: The trainee shall describe how temperatures, volumes, and efficiencies effect the outputs of the associated turbines.Enabling Objective: The trainee shall explain how these systems are controlled for an efficient generation output.Terminal Objective: The trainee shall describe the typical steam turbine arrangement for a combined cycle unit.Enabling Objective: The trainee shall list types of steam turbines typically used in a combined cycle application.Enabling Objective: The trainee shall describe the parts of the steam turbine.Enabling Objective: The trainee shall describe the steam flow paths for the steam turbine.Enabling Objective: The trainee shall describe the generator arrangement associated with the steam turbine.Enabling Objective: The trainee shall describe typical generator protection.Terminal Objective: The trainee shall describe steam turbine support systems.Enabling Objective: The trainee shall describe steam turbine auxiliaries.Enabling Objective: The trainee shall describe lube systems.Enabling Objective: The trainee shall describe the condenser function.Enabling Objective: The trainee shall describe cooling systems.Terminal Objective: The trainee shall describe the typical combined cycle unit operation.Enabling Objective: The trainee shall describe the start-up sequence for a combined cycle unit start.o Enabling Objective: The trainee shall explain speeds, temperatues, and pressures that would be monitored on a typical combined cycle unit start.

Description:

The objective for this course is to present the main features of the Gas Turbine Combined Cycle, as employed for 'Power Generation', and 'Co-Generation' (process steam of gas to industry) The most common types of configurations are presented along with an examination of typical steam turbine arrangements. Operation and control of the combined unit is also discussed in some detail, with the exception of the HRSG which is demonstrated in course 2509. NERC CEH: 4NERC OPS Hours: 4NERC Standard Hours: 0NERC Simulation Hours: 0NERC PE Hours: 4NERC EO Credits: 0

$145.00

Need a Government Grant?

Jumpstart your training with the help of Global Innovative Campus (GIC-Canada) & the Canada Job Grant.

Seminars and Workshops offered within your organization anywhere in the world.

Get notified of our upcoming early bird discounts.

Course Inquiry

Submit this form for no-obligation course inquiries. One of our agents will contact you at the email or phone you enter below.

 

Stay on top of your profession development with useful articles and industry updates Subscribe