4. Operator - Service Rig Training (Module 4)

 
SRT - SERVICE RIG TRAINING - Operator Edition

The Service Rig Training program takes an employee from basic entry level on a Service Rig through to Operator (or Driller). The training consists of videos, quizzes, simulations and simulation-based assessments. The program covers the following eight groups of Work Methods:
  • Transportation
  • Site Requirements
  • Spotting Equipment
  • Rigging In Equipment
  • Basic Equipment Operations
  • Basic Well Operations (Rod Work)
  • Basic Well Operations (Tubing Work)
  • Basic Well Operations (Swabbing)
The trainee progresses through the four floor positions, in the context of each of the Work Methods, to gain the necessary knowledge to progress to the On-The-Job (OJT), or ‘hands-on’ component of his training. 
 
Prerequisite: Derrick Hand classroom and field training
 
Course Length: Between 12 and 24 hours, dependent upon learner. 16 hours is appropriate for a blended learning environment
 
Description:
 
Operator or Driller is considered to be a senior position, and has spent sufficient time in a ‘hands-on’ learning environment to gain knowledge from his various operating experience to progress to the Driller training stage. The Driller trainee will progress through the same series of eight modules that will build on his knowledge of Service Rig operation appropriate to his position, including knowledge of equipment and more advanced procedures.
 
Measurable Outcomes:
 
Upon successful completion, the Operator trainee will demonstrate an advanced understanding of equipment, work methods and job responsibilities associated with the efficient operation of a Service Rig. These include the special considerations associated with managing complex tasks, organizing and leading the crew, giving directions to his subordinates, training juniors in the proper use of tools and operations of equipment and to help create a “SAFETY FIRST ATTITUDE” for himself and all “Rig Family Members”. 
 
The Service Rig Training offers the following features and benefits:
  • State of the art, 3D interactive environment
  • Mobile training solution
  • Self-paced learning
  • Greater retention rate than traditional training methods
  • Subject Matter Expert developed work methods
  • Competency based training
  • Safe-Fail training environment
  • Increased productivity and efficiency
  • Reduced downtime
  • Validation Tool
  • Ongoing tracking of employee training
Instructions:
Once you have completed the course registration, an email will follow shortly containing a web link as well as a username and password in order to login for the training.
Upon successful completion of the web training you will receive a certificate of completion.
 
This online simulation based training will prepare you for the oil and gas industry as a Service Rig Operator.
 
 
Note: This course is conducted online and as such there will be no handouts.
SRT TRAINING MODULES:
 
TRANSPORTATION
  • Secure Loads
  • Prepare to Move to a New Lease Site
SITE REQUIREMENTS
  • Site Requirements Overview
  • Pre‐Job Safety Meetings
  • Lease Organization / Navigation
  • Emergency Preparation / Response
  • Identify Lease Hazards
  • Identify Site Hazards ‐ Simulation
SPOTTING
  • Spotting Overview
  • Spot Crew Change Unit
  • Spot Matting
  • Spot Rig Carrier
  • Spot Pump Truck
  • Spot Rig Tank
  • Spot Utility Skid
  • Spot Catwalk and Pipe Racks
  • Spot Boiler
  • Inspect Loads – Simulation
  • Use Hand Signals to Direct a Vehicle ‐ Simulation
  • Use Hand Signals to Offload Equipment ‐ Simulation
  • Transportation
  • Site Requirements
  • Spotting
RIGGING IN
  • Rigging In Overview
  • Install Ground and Bonding Cables
  • Rig In Pump
  • Rig In Boiler
  • Rig In Crew Change Unit
  • Rig In Tankage Unit
  • Rig In Utility Skid
  • Rig In Carrier
  • Rig In Catwalk, Pipe Racks, and V-Door
  • Rig In Derrick
  • Rig In Derrick – Simulation
BASIC EQUIPMENT OPERATIONS
  • Basic Equipment Operations Overview
  • Rig Tank Operations
  • Rig Pump Operations
  • Remove / Install Wellhead
  • Rig In Accumulator
  • Test / Install BOP
  • Rig In Working Floor
  • Install Air Slips
  • Install Tubing Tongs
  • Install Rod Tongs
  • Crown Saver Operations
  • Raise/Lower Blocks – Simulation
  • Use Slips– Simulation
  • Test Crown Saver– Simulation
  • Basic Equipment Operations
ROD WORK
  • Rod Work Overview
  • Inspect / Install Rod‐Hoisting Equipment
  • Lock Out / Tag Out Lease
  • Lock Out / Tag Out Pump Jack
  • Remove / Install Horse Head
  • Pull / Lay Down Polished Rod
  • Install Rod Table
  • Pull / Lay Down Rods to Ground or Trailer
  • Pick Up Rods from Ground or Trailer
  • Trip Rods to Derrick
  • Trip Rods from Derrick
  • Use Rod Elevators to Trip Rods Out ‐ Simulation
  • Use Rod Elevators to Trip Rods In ‐ Simulation
  • Use Rod Tongs to Make Up Connections ‐ Simulation
  • Use Rod Tongs to Break Out Connections ‐ Simulation
  • Trip Rods to Derrick Using Tongs ‐ Simulation
TUBING WORK
  • Tubing Work Overview
  • Inspect Tubing‐Handling Equipment
  • Install Tubing‐Hoisting Equipment
  • Install Stabbing Valve for Night
  • Install Stabbing Valve During Kick
  • Pull and Lay Down Tubing to Pipe Racks / Ground / Trailer
  • Stand Tubing in Derrick
  • Pick Up and Run In Tubing from Pipe Racks / Ground / Trailer
  • Run In Tubing from Derrick
  • Slip and Cut Drill Line
  • Use Tubing Elevators – Simulation
  • Use Tubing Tongs to Make Up Connections – Simulation
  • Use Tubing Tongs to Break Out Connections – Simulation
  • Rack Tubing – Simulation
  • Secure the Well – Simulation
  • Run Tubing Into Well from Derrick – Simulation
SWABBING
  • Swabbing Overview
  • Prepare and Install Swabbing Equipment
  • Install Sand Line Flags
  • Inhibit Sand Line
  • Cut Sand Line
  • Pour a Rope Socket
  • Swab Well
COMPUTER REQUIREMENTS
  • Windows® XP, Vista, Win 7 or Win 8.
  • NOTE: Does not work on Mac OS
  • Minimum 2 GHz Processor, 256 MB RAM, and 3D Accelerated Video Card 128 MB.
  • High‐speed internet connection
  • Note that SRT does not work on Macs

GIC reserves the right to cancel or change the date or location of its events. GIC's responsibility will, under no circumstances, exceed the amount of the fee collected. GIC is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations. Please click here for complete policies.

You will be emailed your login information once your registration has been confirmed.

We could offer any of our courses at a location of your choice and customized contents according to your needs, please contact us at : inhouse@gic-edu.com or click here  to submit an online request.


Course Materials

Each participant will receive a complete set of course notes and handouts that will serve as informative references.

$599

Need a Government Grant?

Jumpstart your training with the help of Global Innovative Campus (GIC-Canada) & the Canada Job Grant.

Seminars and Workshops offered within your organization anywhere in the world.

Offline Registration

To Register by fax, download and fill our registration form, then fax it to (888) 849-4871. Mail your cheque to our address.

If you have a question regarding this course, please click here to contact us.
Share
On-Site Training

This course can be customized and delivered on-site at your facility.

Stay on top of your profession development with useful articles and industry updates Subscribe