Distance - Steam Power Plants and Combined Cycle Plants (1.2 CEUs)

ARE YOU:

  • Looking for professional development but do not have the time to take off from work?

  • Looking for refresher course on specific engineering topics and cannot find an intensive course to serve your needs?

  • This may be your ideal Professional Development course!

Find out more on how the Professional Development Distance Program may work for you - Click here

Duration:

This course is approximately 3 weeks in duration.

Learning Method:

  • The PDDP program is more of a self-guided learning style.

  • You are required to read the notes and materials given, complete the follow-up assignments on your own, send in your questions prior to your 1 hour webinar meeting (if required) and be involved in live discussion via the internet.

  • Once you have completed the course, you will receive a certificate of completion

Course Description:

This seminar will cover all aspects of steam power plants and combined cycle plants (gas turbines operating in conjunction with a steam power generating plant). This seminar will cover in detail all the components of these types of power plants such as: steam turbines, economizers, boilers, superheaters, reheaters, heat recovery steam generators, deaerators, feedwater heaters, boiler feed pumps, condensers, gas turbines, lubricating systems, instrumentation, and control systems. The design, selection considerations, operation, maintenance, pay-back period, economics of steam power plants and combined cycles, as well as, emission limits, reliability, monitoring and governing systems are also covered in detail. This seminar will also provide up-dated information in respect to all the significant improvements that have been made to steam power plants and combined cycles plants during the last two decades.

The PDDP Distance Education program works as follows:

  • Once you register for this course, you will be sent a login username and password for our online distance website.

  • You will receive the course notes in hard copy through the online website, you will receive a set of notes each week covering the course material.

  • A one hour video-conference session will be conducted by your instructor each week (if required). The objective of this session is to assist in solving the assignments, as well as answer student questions that should be sent to instructor early enough prior to the meeting time. In addition with being able to communicate with the instructor, you will also be able to communicate with other students in the same class and watch their questions being answered as well. (A high speed internet connection is strongly recommended for this feature).

  • Each set of exercises can be completed and submitted by the indicated date and your completed exercise will be marked online and and returned by your instructor.

  • To gain the most from your course, it is highly recommended that you participate fully in all discussions and exercises. Please remember that each course has a form of quiz or exercise at the end to test your understanding of the material. You will be informed of these dates when you receive the course schedule.

*Course commencement date is subject to instructor availability.

Philip Kiameh

Philip Kiameh, M.A.Sc., B.Eng., D.Eng., P.Eng. (Canada) has been a teacher at University of Toronto and Dalhousie University, Canada for more than 24 years. In addition, Prof Kiameh has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. Prof Kiameh has been consistently ranked as "Excellent" or "Very Good" by the delegates who attended his seminars and lectures.
Prof Kiameh wrote 5 books for working engineers from which three have been published by McGraw-Hill, New York. Below is a list of the books authored by Prof Kiameh:
  1. Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.
  2. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.
  3. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.
  4. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).
  5. Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).
Prof. Kiameh has received the following awards:
  1. The first "Excellence in Teaching" award offered by the Professional Development Center at University of Toronto (May, 1996).
  2. The "Excellence in Teaching Award" in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).
  3. Awarded graduation “With Distinction” from Dalhousie University when completed Bachelor of Engineering degree (1983).
  4. Entrance Scholarship to University of Ottawa (1984).
  5. Natural Science and Engineering Research Counsel (NSERC) scholarship towards graduate studies – Master of Applied Science in Engineering (1984 – 1985).
Prof. Kiameh performed research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. He also has more than 30 years of practical engineering experience with Ontario Power Generation (formerly, Ontario Hydro - the largest electric utility in North America).
While working at Ontario Hydro, Prof. Kiameh acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time that Prof Kiameh worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.
Later, Prof Kiameh worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by Prof Kiameh covered in detail the various equipment and systems used in power stations.
Professor Philip Kiameh was awarded his Bachelor of Engineering Degree "with distinction" from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.

(1.2 CEUs / 12 PDHs)

Steam Power Plants, Steam Generators, and Steam Turbines

  • Review of Thermodynamics Principles
  • Steam Power Plants
  • Steam Generators
  • Steam Turbines
  • Reheaters
  • Condensers
  • Feedwater Heaters
  • Efficiency and Heat Rate
  • Supercritical Plants
  • The Fire-Tube Boiler
  • The Water-Tube Boiler
  • The Steam Drum
  • Superheaters and Reheaters
  • Once-Through Boilers
  • Economizers
  • Fans
  • The Stack
  • Steam Generator Control
  • Feedwater and Drum-Level Control
  • Steam-Pressure Control
  • Steam-Temperature Control
  • Mechanisms of Energy Conversion in a Steam Turbine
  • Turbine components
  • Rotating and Stationary blades
  • Thrust bearings
  • Labyrinth seals
  • Turbine controls
  • Testing of Turbine blades
  • Quality Assurance of Turbine Generator Components
  • Assembly and testing of turbine components
  • Turbine Types
  • Compound Turbines
  • Turbine Control Systems
  • Steam Turbine Maintenance
  • Steam Generators, Heat Exchangers, and Condensers
  • Power Station Performance Monitoring
  • The Turbine Governing Systems
  • Steam Chests and Valves
  • Turbine Protective Devices
  • Turbine Instrumentation
  • Lubrication Systems
  • Gland Sealing System
  • Frequently Asked Questions about Turbine-Generator Balancing, Vibration
  • Analysis and Maintenance
  • Features Enhancing The Reliability and Maintainability of Steam Turbines

Combined Cycle Plants

  • Effects of ambient temperature and pressure on combined cycle plant performance
  • Simulation of effects of component deterioration on engine performance
  • Power Augmentation
  • Simulation of engine control system performance
  • Profits, Revenue and Life Cycle Cost Analysis
  • Non-Dimensional Analysis
  • Combined Cycles
  • Integrated Gasification Combined Cycles
  • Single-Shaft Combined Cycle Power Generating Plants
  • Steam Turbine Selection for Combined Cycle Power Systems
  • Absorption Chillers
  • Selection of The Best Power Enhancement Option for Combined Cycle Plants
  • Economic and Technical Considerations for Combined Cycle Performance
  • Enhancement Options
  • Applications of Co-generation and Combined Cycle Plants
  • Selection Considerations of Combined Cycles and Co-generation Plants
  • University of Toronto Central Steam, Co-generation and District Heating Plant
  • Economics of Combined Cycles Co-generation Plants

GIC reserves the right to cancel or change the date or location of its events. GIC's responsibility will, under no circumstances, exceed the amount of the fee collected. GIC is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations. Please click here for complete policies.

This is a Professional Development Distance Program course. These are open to a start date after you register, not scheduled for a specific date.

We could offer any of our courses at a location of your choice and customized contents according to your needs, please contact us at : inhouse@gic-edu.com or click here  to submit an online request.


Course Materials

Each participant will receive a complete set of course notes and handouts that will serve as informative references.

$1,045

Need a Government Grant?

Jumpstart your training with the help of Global Innovative Campus (GIC-Canada) & the Canada Job Grant.

Seminars and Workshops offered within your organization anywhere in the world.

Offline Registration

To Register by fax, download and fill our registration form, then fax it to (888) 849-4871. Mail your cheque to our address.

If you have a question regarding this course, please click here to contact us.
Share
CEUs Certificate

A certificate of completed Continuing Education Units (CEUs) will be granted at the end of this course. A fee is required for all complimentary webinars.

On-Site Training

This course can be customized and delivered on-site at your facility.

Stay on top of your profession development with useful articles and industry updates Subscribe