Fundamentals of Pressure Relief Devices in the Oil and Gas Industry (1.2 CEUs)

Daily Schedule:
8:00am - Registration and coffee
8:30am - Session begins
4:30pm - Adjournment
Breakfast, two refreshment breaks and lunch are provided daily 
(Except Webinars).

Objective

This course is designed to provide participants with an understanding in the fundamentals of Pressure Relief Devices in the Oil and Gas Industry. This course covers Pressure Relief device Selection, Sizing, Installation and Inspection. Oil and Gas PSV standards like AB 506, API 520, AP1 521, API 526 and API 576 will also be discussed briefly.

Target audience

    • Engineers
    • Engineering Students
    • Technologists
    • QA Inspectors

Participants are expected to have a good knowledge of Engineering. This course is interactive and lecture based.  

Learning outcomes
    • Understand the fundamental of pressure safety valve.
    • Determine types of pressure relief devices.
    • Understand different types of pressure on a PSV.
    • Perform PSV sizing and selection.
    • Knowledge of PSV Inlet and Outlet Piping
    • Complete PSV datasheets.
    • Understand different codes and standards that apply to Pressure Safety Valves

Philip Igwe

 

Philip Igwe, M.Sc., Ph.D, P.Eng, is currently an Engineering Manager with an Oil and Gas company. He has more than 17 years of engineering and consulting experience in Oil and Gas industry

He has worked extensively in the areas of Projects, Maintenance and Reliability Improvement of static and rotating equipment in the Oil and Gas industry. His main areas includes Pipelines, Pressure Vessels, Pressure Safety Valves, Pumps, Compressors, Storage Tanks, Boilers and Heat Exchangers

His work on Pressure Safety Valves includes selection, sizing, installation, maintenance and inspection. Within these scopes, he has applied both technical expertise and field experience to ensure safe, economical and reliable use/operation of Pressure Safety Valves.

Dr. Igwe has authored/co-authored more than 15 peer review Conference and Journal papers in the field of Mechanical Engineering. He has also reviewed many technical standards and recommended practice/procedures for a number of technical organizations including NACE International.

Dr. Igwe graduated (valedictorian/summa cum laude) in Mechanical Engineering, Federal University of Technology, Owerri Nigeria. He has a Masters Degree in Mechanical Engineering from University of Leeds UK, and PhD in Mechanical Engineering from the University of Western Ontario, London, Ontario. Dr. Igwe worked as a Researcher with National Research Council (NRC) of Canada. He has many years of teaching experience and was a Post Doc Fellow with the University of Alberta

Dr. Igwe is an API 570 certified Pipeline Inspector, a registered Professional Engineer with APEGA. He is also an active member of ASME and NACE International.

 

Dr. Igwe has authored/co-authored more than 15 peer review Conference and Journal papers in the field of Mechanical Engineering. He has also reviewed many technical standards and recommended practice/procedures for a number of technical organizations including NACE International.

Dr. Igwe graduated (valedictorian/summa cum laude) in Mechanical Engineering, Federal University of Technology, Owerri Nigeria. He has a Masters Degree in Mechanical Engineering from University of Leeds UK, and PhD in Mechanical Engineering from the University of Western Ontario, London, Ontario. Dr. Igwe worked as a Researcher with the National Research Council (NRC) of Canada. He has many years of teaching experience and was a Post Doc Fellow with the University of Alberta.

Dr. Igwe is a registered Professional Engineer with APEGA. He is also an active member of ASME and NACE International.

  • Objective
  • Introduction to Pressure Relief Devices
    • Terminology Definitions
    • Codes and Standards –Summary
  • Types of Pressure Relief Devices
    • Conventional/ Spring loaded PSV
    • Bellow type PSV
    • Pilot operated PSV
    • Rupture Disc
    • Threaded Connections
    • Flanged Connections
  • Components of Pressure Relief Devices (PSV)
    • Seat
    • Disc
    • Spring
    • Body and Bonnet
  • Brief overview of Pressure Safety Valve Standards in the Oil and Gas Industry
  • Pressures: Definitions and Terminologies
    • Set Pressure
    • Operating Pressure
    • MAWP
    • Back Pressure
    • Types of Back Pressure
    • Relieving Pressure
    • Blow down pressure
    • % Overpressure
  • Pressure Safety Valve and Pressure Vessel Relationships
    • Philosophy of PSV
    • Pressure Level Relationship
  • Pressure Safety Valve Selection
    • Safety Valve
    • Relief Valve
    • Double Safety Valves
    • Rupture Disc
  • Pressure Safety Valve Sizing
    • The Sizing Equation
    • Sizing for Overpressure
    • Sizing for fire
  • Pressure safety Valve Installation
    • Inlet piping Configuration
    • Discharge Piping Configuration
    • Isolation Valves in PSV
    • PSV location and Position
    • Bolting and Gasketing
  • Causes of Improper Performance of Pressure Safety Valves
    • Installation
    • Selection
    • Sizing
    • Inspection
  • Pressure Safety Valve Inspection and Testing
    • Reasons for Inspection and Testing
    • Shop Inspection/Overhaul
    • Visual On-stream Inspection
    • Inspection Frequency
    • Time of Inspection
  • Pressure Safety valve Handling and Storage
    • Rough and improper Handling
    • Improper Storage
    • Storage time
    • Storage condition
  • Conclusion
  • References

GIC reserves the right to cancel or change the date or location of its events. GIC's responsibility will, under no circumstances, exceed the amount of the fee collected. GIC is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations. Please click here for complete policies.

Education @ Your Desk. A Live Webinar Class means that you will attend the class via the web using your computer. There are scheduled breaks for coffee and lunch. You use a microphone, headset, or your phone and are able to interact with the instructor and other students while following notes while watching the presentation slides online just as you would in a live classroom. Notes are posted online. For an extra cost a hard copy can be requested.

The virtual classroom is becoming more and more popular, and we have a lot of experience teaching in this format. The only real difference between a live in-class and live via webinar is where you sit and what you look at. You can learn from the comfort of your own home or office. You pay less for the live webinar format than you would for the in-class format, and you do not have to travel to another city to attend the class. Please contact us at gic@gic-edu.com for Special Group & Corporate Rates for one or more participants.

More Dates & Locations

This course is also offered at the following location(s):

  • Edmonton, AB Thursday, October 17, 2019
    Global Innovative Campus
    17818 -107 Ave NW
    Edmonton, AB
    T5S 1J1
    Note: Please do not book travel and accommodation until you receive course confirmation.

We could offer any of our courses at a location of your choice and customized contents according to your needs, please contact us at : inhouse@gic-edu.com or click here  to submit an online request.

PC-based attendees
OS: Windows XP, 2003 Server, Vista, 7, 8
Browser:
Internet Explorer 7.0 or newer
Mozilla Firefox 4.0 or newer
Google Chrome 5.0 or newer

Macintosh based attendees
OS: Mac OS X 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion) or newer
Browser:
Safari 3.0 or newer
Mozilla Firefox 4.0 or newer
Google Chrome 5.0 or newer

iOS
Device:
iPad 1 or newer, iPhone 3GS or newer, iPod Touch (3rd generation) or newer
OS: iOS 6 or newer

Android
OS: Android 2.2 or higher


Course Materials

Each participant will receive a complete set of course notes and handouts that will serve as informative references.

$1,045

Need a Government Grant?

Jumpstart your training with the help of Global Innovative Campus (GIC-Canada) & the Canada Job Grant.

Seminars and Workshops offered within your organization anywhere in the world.

Offline Registration

To Register by fax, download and fill our registration form, then fax it to (888) 849-4871. Mail your cheque to our address.

If you have a question regarding this course, please click here to contact us.
Share
CEUs Certificate

A certificate of completed Continuing Education Units (CEUs) will be granted at the end of this course. A fee is required for all complimentary webinars.

On-Site Training

This course can be customized and delivered on-site at your facility.

Stay on top of your profession development with useful articles and industry updates Subscribe