Drinking Water Treatment Plant Design (1.2 CEUs)

Daily Schedule:
- Registration and coffee (1st day only)
8:30am - Session begins
4:30pm -  Adjournment
Breakfast, two refreshment breaks and lunch are provided daily.
To Improve the understanding of the engineering principle of unit processes and the process design of water treatment  systems
The main objective of this course is to enable the participants to understand the basic engineering principles of each unit process of a conventional water treatment plant and design basis for each unit process of a chemical assisted filtration. Enhanced clarification processes are also discussed. Some other water treatment processes, such as direct and pressure filtration, slow sand filtration, membrane filtration are also covered in the course. The course principle is to improve the knowledge of the participants in water treatment unit processes such that they would be able to gain understanding in process design of water treatment.
Target Audience
Environmental or process design Engineers, Water utility managers and water treatment operators, Civil Engineers, Chemical Engineers and Environmental Engineers of junior and intermediate levels, particularly those with interest in pursuing water treatment areas.

After Attending This Course You Will Be Able To:

  • Understand the principles and objectives of Water Treatment
  • Improve the knowledge of Engineering principles of unit processes in water treatment.
  • Gain understanding and proper application in process design of water treatment systems and practical know-how to design water treatment unit processes.

George Lai

George Lai has a master’s degree in chemical engineering specializing in water and wastewater treatments. He is an Engineering Specialist in Drinking Water Treatment. He provides engineering/technical expertise and support into the development of government’s engineering design standards for drinking water treatment technologies and to municipal drinking water systems. Previously, he worked for companies such as Greer Galloway, Dillon Consulting Limited, Associated Engineering, MMM Group Limited, and Lavalin – MacLaren Engineers Inc., as a senior engineer and project manager in process/detailed design and study of a broad range of projects in water and wastewater treatments for both industrial and municipal sectors.

Achievements in the field: Ten States Standards Water Supply Committee Member; NSF Joint Committee Members on Drinking Water Treatment Units, Treatment Chemicals & System components; Former President of WEAO; Former OWWA Treatment Committee Member; Winner of 2011 WEF Arthur Sidney Bedell Award.

George is also a member of the following associations: PEO, WEF, WEAO, OWWA, CSA.

Program Outline (1.2 CEUs / 12 PDHs)

Day 1 - Conventional Water Treatment Processes - Chemically Assisted Filtration

Water Treatment Principles and Objectives

  • Removal of Contaminants
  • Removal or Inactivation of Pathogens
  • Multi-Barrier Approach
  • Assessment of Treatment Unit Processes to meet Water Treatment Objectives

Factors Concerning Source Water and Water Treatment Design

  • Source Water Quality and Quantity
  • Intake Location
  • Source Water Protection
  • Level of water Treatment Requirements

Basis for Water Treatment Plant Design Flow and Unit Processes and Hydraulic

  • Water Demands
  • Water Treatment Capacity
  • Piping Design
  • Reliability & Redundancy

Water Intake

  • Intake Crib & Pipe
  • Screening
  • Low Lift Pumping

Water Treatment Processes (Chemically Assisted Filtration Processes)

  • Coagulation & Flocculation, Chemical Feed and Storage System
  • Sedimentation/Clarification
  • Enhanced Clarification processes
  • Filtration

Day 2 - Other Water treatment Processes, Residual Management and Disinfection

Other Filtration Processes

  • Direct Filtration
  • Pressure Filtration
  • Slow Sand Filtration
  • Membrane filtration


  • Primary Disinfection
  • Secondary Disinfection
  • Disinfection By-Product (DBP) Control

Enhanced Dissolved Organic Removal, Taste & Odour & DBP Control

  • Ozone
  • Carbon Adsorption
  • Biofiltration

Storage - Clear Well

High Lift Pumping

Residual management

GIC reserves the right to cancel or change the date or location of its events. GIC's responsibility will, under no circumstances, exceed the amount of the fee collected. GIC is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations. Please click here for complete policies.

Toronto Airport West
5444 Dixie Rd
Mississauga, ON
L4W 2L2
Note: Please do not book travel and accommodation until you receive course confirmation.

We could offer any of our courses at a location of your choice and customized contents according to your needs, please contact us at : inhouse@gic-edu.com or click here  to submit an online request.

Course Materials

Each participant will receive a complete set of course notes and handouts that will serve as informative references.

Need a Government Grant?

Jumpstart your training with the help of Global Innovative Campus (GIC-Canada) & the Canada Job Grant.

Seminars and Workshops offered within your organization anywhere in the world.

Offline Registration

To Register by fax, download and fill our registration form, then fax it to (888) 849-4871. Mail your cheque to our address.

If you have a question regarding this course, please click here to contact us.
CEUs Certificate

A certificate of completed Continuing Education Units (CEUs) will be granted at the end of this course. A fee is required for all complimentary webinars.

On-Site Training

This course can be customized and delivered on-site at your facility.

Stay on top of your profession development with useful articles and industry updates Subscribe