Gas Turbine Combined Cycle Power Plants Thermal Performance Testing: ISO 18888:2017, Computer Simulation of Gas Turbine Combined Cycle Power Plants, Major Equipment Performance Testing, Gas Turbines, Compressors, Combustors, Heat Recovery Steam Generators, Steam Turbines, Condensers, Test Methodology and Code Requirements, Equipment Efficiency, Efficiency Calculations, and Profit Optimization (1.8 CEUs)

Daily Schedule:
8:00am - Registration and coffee (1st day only)
8:30am - Session begins
4:30pm - Adjournment
Breakfast, two refreshment breaks and lunch are provided daily (Except Webinars).

Introduction
 
This seminar provides detailed description of all thermal performance tests for gas turbine combined cycle power plants. The seminar is focused on ISO 18888:2017 which provides standard rules for preparing, conducting, evaluating and reporting thermal performance tests on combined cycle and co-generation power plants driven by gas turbines. The seminar provides a detailed explanation of the following for gas turbine combined cycle power plants:
  • Thermal performance tests for general information
  • Thermal acceptance tests for determining the performance of the combined cycle plant in relation to a contractual guarantee
  • Comparative tests designed to check the performance differentials of the combined cycle and co-generation power plants, for testing before and after modifications, upgrades or overhauls
  • Electrical power output
  • Heat rate or thermal efficiency
  • Process steam and/or district heat or generation of electrical power output using a steam turbine
The preparatory work and instrumentation required for each test will be described in detail in this seminar. The efficiency calculations for all the equipment used in combined cycle power plants will be covered in-depth in this seminar.
 
All the processes, operational and maintenance activities, capital projects, technical options, potential initiatives and incentives to implement upgrades/repairs for increasing gas turbine combined cycle power plant equipment efficiency will also be covered in detail.
 
The operation, maintenance, testing, and refurbishment options of all the equipment and systems used in combined cycle power plants will be covered in detail including gas turbines, compressors, combustors, heat recovery steam generators, steam turbines, condensers, deaerators, feedwater heaters, deaerators, electric generators, instrumentation and control systems, and governing systems, etc. All the factors which affect combined cycle power plant efficiency and emissions will be explained thoroughly. All the methods used to calculate the efficiency combined cycle power plants will be covered in detail. All the areas in combined cycle power plants where efficiency loss can occur will be explained.
 
This seminar also provides a thorough understanding of computer simulation of combined cycle gas turbines. The seminar provides in-depth coverage of the computer software used for power enhancement, increased profitability and emission reduction.
 
This seminar will also illustrate through sophisticated computer simulation how gas turbines, and combined cycle plants perform under steady-state and transient conditions. In addition, the delegates will learn how to use the computer simulation program which provides the following benefits:
  • Allow the operator to extend the combined cycle power plant operating period by avoiding unnecessary outages and maintenance activities.
  • Determination of essential combined cycle power plant maintenance activities to reduce the duration of outages.
  • Profit optimization of combined cycle power plants.
  • Minimization of the environmental emissions of combined cycle plants.
Who Should Attend
  • Engineers of all disciplines
  • Managers
  • Technicians
  • Maintenance personnel
  • Other technical individuals
Seminar Outcome
  • Thermal Plant Performance Testing: Gain a thorough understanding of all the performance testing methods for all thermal power plant equipment including boilers, turbines, condensers, pumps, fans, deaerators, and feedwater heaters.
  • Performance Test Methodology and Code Requirements: Understand the methodology, and code requirements for the performance tests of all thermal power plant equipment
  • Performance Test Preparatory Work and Instrumentation: Learn about the preparatory work and instrumentation required for each equipment performance test in a thermal power plant
  • Equipment Efficiency Calculations: Gain a thorough understanding of the efficiency calculations for all the equipment used in circulating fluidized-bed (CFB) boilers and pulverized coal boilers power plants
  • Calculating the Heat Rate of CFB and Pulverized Coal Boiler Power Plants: Learn all the methods used to calculate the heat rate of CFB and pulverized coal boiler coal power plants
  • Benefits of Lowering the Heat Rate of CFB and Pulverized Coal Boiler Power Plants: Understand all the benefits of lowering the heat rate of circulating fluidized-bed boiler coal power plants
  • Methods Used to Improve CFB and Pulverized Coal Boiler Power Plants Heat Rate: Gain a thorough understanding of all the methods used to improve the heat rate of CFB and pulverized boiler coal power plants
  • Processes, Operational and Maintenance Activities in CFB and Pulverized Coal Boiler Power Plants: Discover all the processes, operational and maintenance activities used to improve the heat rate of CFB and pulverized coal power plants
  • Capital Projects Used to Improve the Heat Rate of CFB and Pulverized Coal Boiler Power Plants: Learn about all the capital projects used to improve the heat rate of CFB and pulverized coal power plants
  • Technical Options for Improving the Heat Rate of CFB and Pulverized Coal Boiler Power Plants: Understand all the technical options used to improve the heat rate of CFB and pulverized coal boiler power plants
  • Potential Initiatives and Incentives to Implement Upgrades/Repairs for Improving the Heat Rate of CFB and Pulverized Coal Bed Boiler Power Plants: Discover all the potential initiatives and incentives to implement upgrades/repairs for improving the heat rate of CFB and pulverized coal power plants
  • Factors Affecting CFB and Pulverized Coal Boiler Power Plants Efficiency and Emissions: Learn about all the factors which affect CFB and pulverized coal boiler power plants efficiency and emissions
  • Areas in CFB and Pulverized Coal Power Plants where Efficiency Loss Can Occur: Discover all the areas in CFB and pulverized coal power plants where efficiency loss can occur
  • Optimize the Operation of CFB and Pulverized Coal Power Plant Equipment and Systems to Improve the Plant Heat Rate: Understand all the techniques and methods used to optimize the operation of CFB and pulverized coal power plant equipment and systems to improve the plant heat rate
  • CFB and Pulverized Coal Power Plant Equipment and Systems: Learn about various types of CFB and pulverized coal power plant equipment and systems including: boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries
Training Methodology
 
The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.
 
Special Feature
 
Each delegate will receive a digital copy of the following materials written by the instructor:
  • “POWER GENERATION HANDBOOK” second edition published by McGraw-Hill in 2012 (800 pages)
  • Excerpt of the relevant chapters from the “POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE” published by McGraw-Hill in 2012 (800 pages)
  • THERMAL POWER PLANT PERFORMANCE TESTING MANUAL (includes practical information about all the performance testing methods for all thermal power plant equipment - 300 pages)

Philip Kiameh

Philip Kiameh, M.A.Sc., B.Eng., D.Eng., P.Eng. (Canada) has been a teacher at University of Toronto and Dalhousie University, Canada for more than 24 years. In addition, Prof Kiameh has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. Prof Kiameh has been consistently ranked as "Excellent" or "Very Good" by the delegates who attended his seminars and lectures.
Prof Kiameh wrote 5 books for working engineers from which three have been published by McGraw-Hill, New York. Below is a list of the books authored by Prof Kiameh:
  1. Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.
  2. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.
  3. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.
  4. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).
  5. Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).
Prof. Kiameh has received the following awards:
  1. The first "Excellence in Teaching" award offered by the Professional Development Center at University of Toronto (May, 1996).
  2. The "Excellence in Teaching Award" in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).
  3. Awarded graduation “With Distinction” from Dalhousie University when completed Bachelor of Engineering degree (1983).
  4. Entrance Scholarship to University of Ottawa (1984).
  5. Natural Science and Engineering Research Counsel (NSERC) scholarship towards graduate studies – Master of Applied Science in Engineering (1984 – 1985).
Prof. Kiameh performed research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. He also has more than 30 years of practical engineering experience with Ontario Power Generation (formerly, Ontario Hydro - the largest electric utility in North America).
While working at Ontario Hydro, Prof. Kiameh acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time that Prof Kiameh worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.
Later, Prof Kiameh worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by Prof Kiameh covered in detail the various equipment and systems used in power stations.
Professor Philip Kiameh was awarded his Bachelor of Engineering Degree "with distinction" from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.
Day 1 – Steam Power Plants, Steam Generators, Steam Turbines, Steam Turbine Auxiliaries, Boiler Efficiency, Combustion Efficiency, Fuel-to-Steam or Fuel-to-Water Efficiency, ASME Power Test Code PTC 4, Input-Output Method, Heat Loss Method, Standard BTS-2000 Test Conditions
  • Steam Power Plants
  • Efficiency and Heat Rate
  • Supercritical Plants
  • Superheaters and Reheaters
  • Economizers
  • Steam Generator Control
  • Feedwater-Level Control
  • Steam-Pressure Control
  • Steam-Temperature Control
  • Turbine components
  • Turbine controls
  • Testing of Turbine blades
  • Quality Assurance of Turbine Generator Components
  • Assembly and testing of turbine components
  • Turbine Types
  • Turbine Control Systems
  • Steam Turbine Maintenance
  • Steam Generators, Heat Exchangers, and Condensers
  • Power Station Performance Monitoring
  • The Turbine Governing Systems
  • Steam Chests and Valves
  • Turbine Protective Devices
  • Turbine Instrumentation
  • Determine the boiler efficiency
  • Combustion efficiency
  • Fuel-To-Steam or Fuel-to-Water Efficiency
  • ASME Power Test Code, PTC 4
  • Fuel-to-steam efficiency
  • Input-output method
  • Heat Loss method
  • Standard BTS-2000 test conditions
Day 2 – Steam Turbine Performance Testing, ASME PTC 6 Test, ASME PTC 6 Report, ASME PTC 6.1, ASME PTC 6S, DIN-1943, CIE/IEC 953-1, CIE/IEC 953-2, Station Instrument Testing, Condenser Performance Test, Thermal Performance
Analysis of Variable Conditions in a Steam Power Plant, Factors Affecting the Condenser Performance, Thermal Balance Equations, Heat Transfer Society (HEI) formula, Condenser Thermal Performance Analyses of Variable Conditions, Boiler
Feed Pump (BFP) Performance Assessment, BFP Design Curves, BFP suction and Discharge Head Calculations, Discharge Water Leg Correction, Total Dynamic Head Developed Calculation, BFP Efficiency Calculation, Performance Assessment of Forced Draft and Induced Draft Fans
  • Steam Turbine Performance Testing
  • ASME PTC 6 Test (steam turbine testing)
  • ASME PTC 6 Report
  • ASME PTC 6.1 (alternative steam turbine test)
  • ASME PTC 6S (Routine Performance Testing)
  • DIN-1943 (steam turbine testing with allowances for measurement uncertainty, aging, etc)
  • CIE/IEC 953-1 (steam turbine testing code)
  • CIE/IEC 953-2 (steam turbine testing code)
  • Station Instrument Testing
  • Condenser Performance Test
  • Thermal Performance Analysis of Variable Conditions in a Steam Power Plant
  • Factors Affecting the Condenser Performance
  • Condenser Overall Heat Transfer Coefficient
  • Heat Transfer Society (HEI) formula
  • Condenser Cleanliness Coefficients
  • Condenser Correction Pressure
  • Condenser Thermal Performance Analyses of Variable Conditions
  • Boiler Feed Pump (BFP) Performance Assessment
  • BFP Performance Testing
  • Affinity Laws
  • BFP Design Curves
  • Pump Suction Head Calculation
  • Suction Water Leg Correction
  • Pump Discharge Head Calculation
  • Water Density at Discharge Conditions, ρd
  • Discharge Water Leg Correction, Zd
  • Velocity at Pump Discharge, Vd
  • Total Dynamic Head Developed Calculation
  • BFP Efficiency Calculation
  • Performance Assessment of Forced Draft and Induced Draft Fans
  • Purpose of the Performance Test
  • Performance Tests Terms and Definitions
  • Performance Standards
  • British Standard, BS848
  • Field Testing
  • Instruction for Site Testing
  • Location of Measurement Planes
  • Location of The Flow Measurement Plane within the “Test length”
  • Location of Pressure Measurement Plane
  • Transverse Readings, Anemometer, Determination of Fan Pressure, Measurment of Static Pressure
  • Example: Performance Test Report of a Fan
  • Performance Calculation
  • Fan Efficiency
Day 3 – Gas Turbine Combined Cycle Power Plants – Thermal Performance Tests (ISO 18888:2017),
  • ISO 18888:2017: Standard Rules for Preparing, Conducting, Evaluating and Reporting Thermal Performance Tests on Combined Cycle and Co-Generation Power Plants Driven by Gas Turbines Thermal Performance Tests for General Information
  • Thermal Acceptance Tests for Determining the Performance of the Combined Cycle Plant in Relation to a Contractual Guarantee
  • Comparative Tests Designed to Check the Performance Differentials of the Combined Cycle and Co-Generation Power Plants, for Testing Before and After Modifications, Upgrades or Overhauls
  • Electrical power output Test
  • Heat rate or thermal efficiency Test
  • Process steam and/or district heat or generation of electrical power output using a steam turbine Test
  • Preparation for Tests: Performance degradation, Measurement Classification, Test Procedure, Field Preparations for the Performance Test, Instrument and Measuring Methods, Power Output Measurement, Flow and Temperature Measurements
  • Determination of Fuel Properties: Tests on Fuel Gas, Tests on Liquid Fuel
  • Determination of Cooling Water Flow into the Condenser
  • Execution of Test: Base Reference Conditions, Preliminary Test, Performance Test, Duration of Test Runs, Auxiliary Equipment Operation, Tests with Inlet Air Heating System, Tests with Inlet Air Cooling System, Maximum Permissible Variation in Operation Conditions
  • Calculation of Results for Absolute Test: Correction to Base Reference Conditions, Power Output for Combined Cycle Overall Test, Heat Rate for Combined Cycle Overall Test, Power Output of Steam Turbine Determination
  • Part Load Tests: Test Set-up and Conduct, Corrective Method for Part Loads
  • Calculation of Results for Comparative Test: Comparative Performance Test Uncertainty, Preparation for Comparative Test, Execution of Comparative Tests and Calculation of Results

GIC reserves the right to cancel or change the date or location of its events. GIC's responsibility will, under no circumstances, exceed the amount of the fee collected. GIC is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations. Please click here for complete policies.

Toronto Airport West
5444 Dixie Rd
Mississauga, ON
L4W 2L2
Note: Please do not book travel and accommodation until you receive course confirmation.

More Dates & Locations

This course is also offered at the following location(s):

  • Webinars (Live) Wednesday, August 28, 2019

    Education @ Your Desk. A Live Webinar Class means that you will attend the class via the web using your computer. There are scheduled breaks for coffee and lunch. You use a microphone, headset, or your phone and are able to interact with the instructor and other students while following notes while watching the presentation slides online just as you would in a live classroom. Notes are posted online. For an extra cost a hard copy can be requested.

    The virtual classroom is becoming more and more popular, and we have a lot of experience teaching in this format. The only real difference between a live in-class and live via webinar is where you sit and what you look at. You can learn from the comfort of your own home or office. You pay less for the live webinar format than you would for the in-class format, and you do not have to travel to another city to attend the class. Please contact us at gic@gic-edu.com for Special Group & Corporate Rates for one or more participants.

We could offer any of our courses at a location of your choice and customized contents according to your needs, please contact us at : inhouse@gic-edu.com or click here  to submit an online request.


Course Materials

Each participant will receive a complete set of course notes and handouts that will serve as informative references.

$1,945

$1,845


Price will increase on 29 Jul 2019

The current fee for this course is $1,845.00. The current price increases on 29 July GST applies where applicable.

Need a Government Grant?

Jumpstart your training with the help of Global Innovative Campus (GIC-Canada) & the Canada Job Grant.

Seminars and Workshops offered within your organization anywhere in the world.

Offline Registration

To Register by fax, download and fill our registration form, then fax it to (888) 849-4871. Mail your cheque to our address.

If you have a question regarding this course, please click here to contact us.
Related Courses
Share
CEUs Certificate

A certificate of completed Continuing Education Units (CEUs) will be granted at the end of this course. A fee is required for all complimentary webinars.

On-Site Training

This course can be customized and delivered on-site at your facility.

Stay on top of your profession development with useful articles and industry updates Subscribe