Distance - Gas Turbine Combined Cycle Power Plants Thermal Performance Testing: ISO 18888:2017, Computer Simulation of Gas Turbine Combined Cycle Power Plants, Major Equipment Performance Testing, Gas Turbines, Compressors, Combustors, Heat Recovery Steam Generators, Steam Turbines, Condensers, Test Methodology and Code Requirements, Equipment Efficiency, Efficiency Calculations, and Profit Optimization (1.8 CEUs)

ARE YOU:

  • Looking for professional development but do not have the time to take off from work?

  • Looking for refresher course on specific engineering topics and cannot find an intensive course to serve your needs?

  • This may be your ideal Professional Development course!

Find out more on how the Professional Development Distance Program may work for you - Click here

Duration:

This course is approximately 4-5 weeks in duration.

Learning Method:

  • The PDDP program is more of a self-guided learning style.

  • You are required to read the notes and materials given, complete the follow-up assignments on your own, send in your questions prior to your 1 hour webinar meeting (if required) and be involved in live discussion via the internet.

  • Once you have completed the course, you will receive a certificate of completion

Introduction
 
This seminar provides detailed description of all thermal performance tests for gas turbine combined cycle power plants. The seminar is focused on ISO 18888:2017 which provides standard rules for preparing, conducting, evaluating and reporting thermal performance tests on combined cycle and co-generation power plants driven by gas turbines. The seminar provides a detailed explanation of the following for gas turbine combined cycle power plants:
  • Thermal performance tests for general information
  • Thermal acceptance tests for determining the performance of the combined cycle plant in relation to a contractual guarantee
  • Comparative tests designed to check the performance differentials of the combined cycle and co-generation power plants, for testing before and after modifications, upgrades or overhauls
  • Electrical power output
  • Heat rate or thermal efficiency
  • Process steam and/or district heat or generation of electrical power output using a steam turbine
The preparatory work and instrumentation required for each test will be described in detail in this seminar. The efficiency calculations for all the equipment used in combined cycle power plants will be covered in-depth in this seminar.
 
All the processes, operational and maintenance activities, capital projects, technical options, potential initiatives and incentives to implement upgrades/repairs for increasing gas turbine combined cycle power plant equipment efficiency will also be covered in detail.
 
The operation, maintenance, testing, and refurbishment options of all the equipment and systems used in combined cycle power plants will be covered in detail including gas turbines, compressors, combustors, heat recovery steam generators, steam turbines, condensers, deaerators, feedwater heaters, deaerators, electric generators, instrumentation and control systems, and governing systems, etc. All the factors which affect combined cycle power plant efficiency and emissions will be explained thoroughly. All the methods used to calculate the efficiency combined cycle power plants will be covered in detail. All the areas in combined cycle power plants where efficiency loss can occur will be explained.
 
This seminar also provides a thorough understanding of computer simulation of combined cycle gas turbines. The seminar provides in-depth coverage of the computer software used for power enhancement, increased profitability and emission reduction.
 
This seminar will also illustrate through sophisticated computer simulation how gas turbines, and combined cycle plants perform under steady-state and transient conditions. In addition, the delegates will learn how to use the computer simulation program which provides the following benefits:
  • Allow the operator to extend the combined cycle power plant operating period by avoiding unnecessary outages and maintenance activities.
  • Determination of essential combined cycle power plant maintenance activities to reduce the duration of outages.
  • Profit optimization of combined cycle power plants.
  • Minimization of the environmental emissions of combined cycle plants.
Who Should Attend
  • Engineers of all disciplines
  • Managers
  • Technicians
  • Maintenance personnel
  • Other technical individuals
Seminar Outcome
  • Thermal Plant Performance Testing: Gain a thorough understanding of all the performance testing methods for all thermal power plant equipment including boilers, turbines, condensers, pumps, fans, deaerators, and feedwater heaters.
  • Performance Test Methodology and Code Requirements: Understand the methodology, and code requirements for the performance tests of all thermal power plant equipment
  • Performance Test Preparatory Work and Instrumentation: Learn about the preparatory work and instrumentation required for each equipment performance test in a thermal power plant
  • Equipment Efficiency Calculations: Gain a thorough understanding of the efficiency calculations for all the equipment used in circulating fluidized-bed (CFB) boilers and pulverized coal boilers power plants
  • Calculating the Heat Rate of CFB and Pulverized Coal Boiler Power Plants: Learn all the methods used to calculate the heat rate of CFB and pulverized coal boiler coal power plants
  • Benefits of Lowering the Heat Rate of CFB and Pulverized Coal Boiler Power Plants: Understand all the benefits of lowering the heat rate of circulating fluidized-bed boiler coal power plants
  • Methods Used to Improve CFB and Pulverized Coal Boiler Power Plants Heat Rate: Gain a thorough understanding of all the methods used to improve the heat rate of CFB and pulverized boiler coal power plants
  • Processes, Operational and Maintenance Activities in CFB and Pulverized Coal Boiler Power Plants: Discover all the processes, operational and maintenance activities used to improve the heat rate of CFB and pulverized coal power plants
  • Capital Projects Used to Improve the Heat Rate of CFB and Pulverized Coal Boiler Power Plants: Learn about all the capital projects used to improve the heat rate of CFB and pulverized coal power plants
  • Technical Options for Improving the Heat Rate of CFB and Pulverized Coal Boiler Power Plants: Understand all the technical options used to improve the heat rate of CFB and pulverized coal boiler power plants
  • Potential Initiatives and Incentives to Implement Upgrades/Repairs for Improving the Heat Rate of CFB and Pulverized Coal Bed Boiler Power Plants: Discover all the potential initiatives and incentives to implement upgrades/repairs for improving the heat rate of CFB and pulverized coal power plants
  • Factors Affecting CFB and Pulverized Coal Boiler Power Plants Efficiency and Emissions: Learn about all the factors which affect CFB and pulverized coal boiler power plants efficiency and emissions
  • Areas in CFB and Pulverized Coal Power Plants where Efficiency Loss Can Occur: Discover all the areas in CFB and pulverized coal power plants where efficiency loss can occur
  • Optimize the Operation of CFB and Pulverized Coal Power Plant Equipment and Systems to Improve the Plant Heat Rate: Understand all the techniques and methods used to optimize the operation of CFB and pulverized coal power plant equipment and systems to improve the plant heat rate
  • CFB and Pulverized Coal Power Plant Equipment and Systems: Learn about various types of CFB and pulverized coal power plant equipment and systems including: boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries
Training Methodology
 
The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.
 
Special Feature
 
Each delegate will receive a digital copy of the following materials written by the instructor:
  • “POWER GENERATION HANDBOOK” second edition published by McGraw-Hill in 2012 (800 pages)
  • Excerpt of the relevant chapters from the “POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE” published by McGraw-Hill in 2012 (800 pages)
  • THERMAL POWER PLANT PERFORMANCE TESTING MANUAL (includes practical information about all the performance testing methods for all thermal power plant equipment - 300 pages)

The PDDP Distance Education program works as follows:

  • Once you register for this course, you will be sent a login username and password for our online distance website.

  • You will receive the course notes in hard copy through the online website, you will receive a set of notes each week covering the course material.

  • A one hour video-conference session will be conducted by your instructor each week (if required). The objective of this session is to assist in solving the assignments, as well as answer student questions that should be sent to instructor early enough prior to the meeting time. In addition with being able to communicate with the instructor, you will also be able to communicate with other students in the same class and watch their questions being answered as well. (A high speed internet connection is strongly recommended for this feature).

  • Each set of exercises can be completed and submitted by the indicated date and your completed exercise will be marked online and and returned by your instructor.

  • To gain the most from your course, it is highly recommended that you participate fully in all discussions and exercises. Please remember that each course has a form of quiz or exercise at the end to test your understanding of the material. You will be informed of these dates when you receive the course schedule.

*Course commencement date is subject to instructor availability.

Philip Kiameh

Philip Kiameh, M.A.Sc., B.Eng., D.Eng., P.Eng. (Canada) has been a teacher at University of Toronto and Dalhousie University, Canada for more than 24 years. In addition, Prof Kiameh has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. Prof Kiameh has been consistently ranked as "Excellent" or "Very Good" by the delegates who attended his seminars and lectures.
Prof Kiameh wrote 5 books for working engineers from which three have been published by McGraw-Hill, New York. Below is a list of the books authored by Prof Kiameh:
  1. Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.
  2. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.
  3. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.
  4. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).
  5. Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).
Prof. Kiameh has received the following awards:
  1. The first "Excellence in Teaching" award offered by the Professional Development Center at University of Toronto (May, 1996).
  2. The "Excellence in Teaching Award" in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).
  3. Awarded graduation “With Distinction” from Dalhousie University when completed Bachelor of Engineering degree (1983).
  4. Entrance Scholarship to University of Ottawa (1984).
  5. Natural Science and Engineering Research Counsel (NSERC) scholarship towards graduate studies – Master of Applied Science in Engineering (1984 – 1985).
Prof. Kiameh performed research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. He also has more than 30 years of practical engineering experience with Ontario Power Generation (formerly, Ontario Hydro - the largest electric utility in North America).
While working at Ontario Hydro, Prof. Kiameh acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time that Prof Kiameh worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.
Later, Prof Kiameh worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by Prof Kiameh covered in detail the various equipment and systems used in power stations.
Professor Philip Kiameh was awarded his Bachelor of Engineering Degree "with distinction" from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.
Steam Power Plants, Steam Generators, Steam Turbines, Steam Turbine Auxiliaries, Boiler Efficiency, Combustion Efficiency, Fuel-to-Steam or Fuel-to-Water Efficiency, ASME Power Test Code PTC 4, Input-Output Method, Heat Loss Method, Standard BTS-2000 Test Conditions
  • Steam Power Plants
  • Efficiency and Heat Rate
  • Supercritical Plants
  • Superheaters and Reheaters
  • Economizers
  • Steam Generator Control
  • Feedwater-Level Control
  • Steam-Pressure Control
  • Steam-Temperature Control
  • Turbine components
  • Turbine controls
  • Testing of Turbine blades
  • Quality Assurance of Turbine Generator Components
  • Assembly and testing of turbine components
  • Turbine Types
  • Turbine Control Systems
  • Steam Turbine Maintenance
  • Steam Generators, Heat Exchangers, and Condensers
  • Power Station Performance Monitoring
  • The Turbine Governing Systems
  • Steam Chests and Valves
  • Turbine Protective Devices
  • Turbine Instrumentation
  • Determine the boiler efficiency
  • Combustion efficiency
  • Fuel-To-Steam or Fuel-to-Water Efficiency
  • ASME Power Test Code, PTC 4
  • Fuel-to-steam efficiency
  • Input-output method
  • Heat Loss method
  • Standard BTS-2000 test conditions
Steam Turbine Performance Testing, ASME PTC 6 Test, ASME PTC 6 Report, ASME PTC 6.1, ASME PTC 6S, DIN-1943, CIE/IEC 953-1, CIE/IEC 953-2, Station Instrument Testing, Condenser Performance Test, Thermal Performance
Analysis of Variable Conditions in a Steam Power Plant, Factors Affecting the Condenser Performance, Thermal Balance Equations, Heat Transfer Society (HEI) formula, Condenser Thermal Performance Analyses of Variable Conditions, Boiler
Feed Pump (BFP) Performance Assessment, BFP Design Curves, BFP suction and Discharge Head Calculations, Discharge Water Leg Correction, Total Dynamic Head Developed Calculation, BFP Efficiency Calculation, Performance Assessment of Forced Draft and Induced Draft Fans
  • Steam Turbine Performance Testing
  • ASME PTC 6 Test (steam turbine testing)
  • ASME PTC 6 Report
  • ASME PTC 6.1 (alternative steam turbine test)
  • ASME PTC 6S (Routine Performance Testing)
  • DIN-1943 (steam turbine testing with allowances for measurement uncertainty, aging, etc)
  • CIE/IEC 953-1 (steam turbine testing code)
  • CIE/IEC 953-2 (steam turbine testing code)
  • Station Instrument Testing
  • Condenser Performance Test
  • Thermal Performance Analysis of Variable Conditions in a Steam Power Plant
  • Factors Affecting the Condenser Performance
  • Condenser Overall Heat Transfer Coefficient
  • Heat Transfer Society (HEI) formula
  • Condenser Cleanliness Coefficients
  • Condenser Correction Pressure
  • Condenser Thermal Performance Analyses of Variable Conditions
  • Boiler Feed Pump (BFP) Performance Assessment
  • BFP Performance Testing
  • Affinity Laws
  • BFP Design Curves
  • Pump Suction Head Calculation
  • Suction Water Leg Correction
  • Pump Discharge Head Calculation
  • Water Density at Discharge Conditions, ρd
  • Discharge Water Leg Correction, Zd
  • Velocity at Pump Discharge, Vd
  • Total Dynamic Head Developed Calculation
  • BFP Efficiency Calculation
  • Performance Assessment of Forced Draft and Induced Draft Fans
  • Purpose of the Performance Test
  • Performance Tests Terms and Definitions
  • Performance Standards
  • British Standard, BS848
  • Field Testing
  • Instruction for Site Testing
  • Location of Measurement Planes
  • Location of The Flow Measurement Plane within the “Test length”
  • Location of Pressure Measurement Plane
  • Transverse Readings, Anemometer, Determination of Fan Pressure, Measurment of Static Pressure
  • Example: Performance Test Report of a Fan
  • Performance Calculation
  • Fan Efficiency
Gas Turbine Combined Cycle Power Plants – Thermal Performance Tests (ISO 18888:2017),
  • ISO 18888:2017: Standard Rules for Preparing, Conducting, Evaluating and Reporting Thermal Performance Tests on Combined Cycle and Co-Generation Power Plants Driven by Gas Turbines Thermal Performance Tests for General Information
  • Thermal Acceptance Tests for Determining the Performance of the Combined Cycle Plant in Relation to a Contractual Guarantee
  • Comparative Tests Designed to Check the Performance Differentials of the Combined Cycle and Co-Generation Power Plants, for Testing Before and After Modifications, Upgrades or Overhauls
  • Electrical power output Test
  • Heat rate or thermal efficiency Test
  • Process steam and/or district heat or generation of electrical power output using a steam turbine Test
  • Preparation for Tests: Performance degradation, Measurement Classification, Test Procedure, Field Preparations for the Performance Test, Instrument and Measuring Methods, Power Output Measurement, Flow and Temperature Measurements
  • Determination of Fuel Properties: Tests on Fuel Gas, Tests on Liquid Fuel
  • Determination of Cooling Water Flow into the Condenser
  • Execution of Test: Base Reference Conditions, Preliminary Test, Performance Test, Duration of Test Runs, Auxiliary Equipment Operation, Tests with Inlet Air Heating System, Tests with Inlet Air Cooling System, Maximum Permissible Variation in Operation Conditions
  • Calculation of Results for Absolute Test: Correction to Base Reference Conditions, Power Output for Combined Cycle Overall Test, Heat Rate for Combined Cycle Overall Test, Power Output of Steam Turbine Determination
  • Part Load Tests: Test Set-up and Conduct, Corrective Method for Part Loads
  • Calculation of Results for Comparative Test: Comparative Performance Test Uncertainty, Preparation for Comparative Test, Execution of Comparative Tests and Calculation of Results

GIC reserves the right to cancel or change the date or location of its events. GIC's responsibility will, under no circumstances, exceed the amount of the fee collected. GIC is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations. Please click here for complete policies.

This is a Professional Development Distance Program course. These are open to a start date after you register, not scheduled for a specific date.

We could offer any of our courses at a location of your choice and customized contents according to your needs, please contact us at : inhouse@gic-edu.com or click here  to submit an online request.


Course Materials

Each participant will receive a complete set of course notes and handouts that will serve as informative references.

$1,345

Need a Government Grant?

Jumpstart your training with the help of Global Innovative Campus (GIC-Canada) & the Canada Job Grant.

Seminars and Workshops offered within your organization anywhere in the world.

Offline Registration

To Register by fax, download and fill our registration form, then fax it to (888) 849-4871. Mail your cheque to our address.

If you have a question regarding this course, please click here to contact us.
Share
CEUs Certificate

A certificate of completed Continuing Education Units (CEUs) will be granted at the end of this course. A fee is required for all complimentary webinars.

On-Site Training

This course can be customized and delivered on-site at your facility.

Stay on top of your profession development with useful articles and industry updates Subscribe