Distance - Water and Wastewater Engineering (18-Env-A4)

ARE YOU:
  • Busy with your work schedule?
  • Can not attend training within week days?
  • Looking for refresher course on specific engineering topics and can not find an intensive course to serve your needs?
  • This course might be the right thing to meet your needs!
Course Description:

18-Env-A4 Water and Wastewater Engineering
Characteristics of water: physical, chemical and biological parameters, standard methods of water analyses, impact in streams and treatment of urban and agricultural runoff, population forecasting, prediction of water demand and wastewater generation, water and wastewater quality, water and wastewater treatment plants and systems: physical, chemical and biological systems, primary, secondary and tertiary treatment, sedimentation, coagulation, flocculation, filtration, adsorption, ammonia removal, aeration, anaerobic and aerobic digestion, activated sludge and trickling filter, ion exchange, lagoons, disinfection, natural treatment systems, sludge treatment and disposal, industrial wastewater treatment: characteristics of industrial wastewater, treatment levels and available technologies. Design of isolated wastewater treatment systems. Emphasis on need to consider nutrient and heat recovery as well as impact of emerging contaminants and its implication for wastewater treatment plant design.
 
Recommended Text(s): 
  • N/A Metcalf & Eddy, Inc., George Tchobanoglous, H. David Stensel, Ryujiro Tsuchihashi, Franklin L. Burton, Wastewater Engineering: Treatment and Resource Recovery, published: September 3rd 2013, ISBN: 9780073401188
  • N/A Water Environment Federation, Wastewater Treatment Process Modeling, Second Edition (MOP31), published: August 9th 2013, ISBN: 9780071798426
  • E.W. Bob Boulware, Alternative Water Sources and Wastewater Management, published: September 11th 2012, ISBN: 9780071719513  
  • N/A Water Environment Federation, Safety Health and Security in Wastewater Systems, Sixth Edition, MOP 1, published: September 5th 2012, ISBN: 9780071780933 N/A American Water Works Association, 
  • N/A American Society of Civil Engineers, Water Treatment Plant Design, Fifth Edition, Published: July 10th 2012, ISBN: 9780071745727 
  • Casey, T.J., Unit Processes in Water and Wastewater Engineering. Wiley Interscience, 1997. ISBN: 0471966932 
  • Weber, W.J. and DiGiano, F.A. Process Dynamics in Environmental Systems. Wiley Interscience. ISBN: 0471017116 
  • McCarty, P., and Rittmann, B., Environmental Biotechnology: Principles and Applications. McGraw Hill, 2000. ISBN: 0072345535 
  • Metcalf & Eddy, Inc., Wastewater Engineering: Collection and Pumping of Wastewater. McGraw‐ Hill, 1981. ISBN: 007041680X 
  • Burton, F., Metcalf and Eddy Inc, Tchobanoglous, G., Wastewater Engineering: Treatment, Disposal and Reuse. McGraw Hill, 1991. ISBN: 0070416907 
  • Reed, S.C. and Crites, R.W., Natural Systems for Waste Management and Treatment. McGraw Hill, 1996. ISBN: 0071346627 
  • Eckenfelder, W.W. (Jr)., Industrial Water Pollution Control, (2nd Ed). McGraw‐Hill, 1989. ISBN: 007018903X. 
  • Guyer, H.H., Industrial Processes and Waste Stream Management. Wiley Interscience, 1998. ISBN: 0471299847. 
  • Bishop, P., Pollution Prevention: Fundamentals and Practice. McGraw Hill, 2000. ISBN: 0073661473 
  • American Water Works Association, Water Treatment Plant Design, (3rd Ed.). McGraw‐Hill, 1997. ISBN: 0070016437. American Water Works Association, Water Quality and Treatment: A Handbook of Community Water Supplies. McGraw Hill, 1998. ISBN: 0070015406 
  • Kawamura, S., Integrated Design and Operation of Water Treatment Facilities. Wiley and Sons, 2000. ISBN: 0471350931 
  • Nyer, E.K., Groundwater Treatment Technology, (2nd Ed.). Wiley Interscience, 1992. ISBN: 0471284149. 
  • R.L. Droste, Wiley, Theory and Practice of Water and Wastewater Treatment, 1997.  
*Course commencement date is subject to instructor availability.
 
Find out more information about the Distance courses and exam preparation here.

The distance education program works as follows:

  • Each course is 8-12 weeks in duration.
  • You will receive a set of notes each week covering the course material via the internet.  In addition, you will receive practice problems and assignments very similar to the associations' past exams.
  • A one hour video-conference session will be conducted by your instructor each week. The objective of this session is to assist in solving the assignments as well as answer student questions that should be sent to instructor early enough prior to the meeting time. In addition with being able to communicate with the instructor, you will also be able to communicate with other students in the same class and watch their questions answered as well. A high speed internet connection is strongly recommended for this feature.
  • Each set of assignments must be completed and submitted by the indicated date and your completed assignment will be marked and returned by your instructor.
  • Upon completion of the assignments, you will be sent a final exam. It is recommended that you try to simulate the actual exam conditions (i.e., no aids and a time limit) when writing it. You will then submit this final exam for review and marking. 
  • To gain the most from your course, it is highly recommended that you participate fully in all discussions and assignments.  Please remember that each course has 8-12 weeks duration and set dates for assignments to be submitted and a set date to submit the final exam. You will be informed of these dates when you receive the course schedule.
Technical Exam Preparation Program –Distance Education (via the Internet)

 

Global Innovative Campus “GIC-Canada” offers technical exam preparation courses for the following association examinations:

Our courses syllabi are based on the Canadian Council of Professional Engineers (CCPE) - Engineers Canada curriculum. Each course is an interactive program that you can complete over the internet right from your computer, with the option of two-way live video or audio. (minimum system requirements needed)

 

We offer P. Eng. Exam Preparation services:

  1. Technical P.Eng. exams preparation (Distance Education)

  2. Record of Experience, resume and Interview documentation Preparation

  3. NPPE - National Professional Practice Exam preparation

  4. Interview preparation


GIC reserves the right to cancel or change the date or location of its events. GIC's responsibility will, under no circumstances, exceed the amount of the fee collected. GIC is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations. Please click here for complete policies.

This Distance Education course is scheduled to start on the specified date.

We could offer any of our courses at a location of your choice and customized contents according to your needs, please contact us at : inhouse@gic-edu.com or click here  to submit an online request.


Course Materials

Each participant will receive a complete set of course notes and handouts that will serve as informative references.

$1,045

Need a Government Grant?

Jumpstart your training with the help of Global Innovative Campus (GIC-Canada) & the Canada Job Grant.

Seminars and Workshops offered within your organization anywhere in the world.

Offline Registration

To Register by fax, download and fill our registration form, then fax it to (888) 849-4871. Mail your cheque to our address.

If you have a question regarding this course, please click here to contact us.
Related Courses
Share
On-Site Training

This course can be customized and delivered on-site at your facility.

Stay on top of your profession development with useful articles and industry updates Subscribe